Events by this organizer

Kubota WG Spark Ignited Engines Level 300

Course Description:
The WG Spark Ignited Engine course focuses on Kubota’s SI engine models. Emphasis will be placed on multi‐fuel system components and their operation, including liquid propane and gasoline fuel systems. Electrical diagnosis is a major focus of this course, in addition to KGST function and utilization. Students will be challenged with an abundant amount of real‐ world hands‐on activities.

Activities include:

1. Discuss WG spark ignited engine components
   and operation
2. Diagnosing and replacing faulty engine
   components
3. Electrical component testing
4. Fuel system components and operation
5. O2 sensor operation
6. Catalyst operation
7. Breakout box activities
8. Kubota special service tool usage
9. How to use Active Test and Utilities with the diagnostic interface
10. Data monitoring and data graphing with the diagnostic interface
11. DTC inspection procedures

It is required that all attendees complete the online prerequisite courses before attending this class. Each course will take approximately 20 min to complete.

• 22010 ‐ WG Engine Overview
• 22020 ‐ WG Mechanism
• 22110 ‐ WG Sensors
• 22120 ‐ WG Actuators
• 22130 ‐ WG Components: Mechanical Parts
• 22210 ‐ WG Parts Inspection: Common Parts
• 22211 ‐ WG Parts Inspection: Actuators
• 22220 ‐ WG Maintenance
• 22310 ‐ WG System Control
• 22410 ‐ WG Cause & Effect: System Action
• 22510 ‐ WG Engine Diagnostic Tool Overview
• 22520 ‐ EDIS Introduction
• 22530 ‐ KGST

Special Instructions:

• Students are required to bring their laptops for Pre and Post test, E-Com and KEP access loaded for functionality checks.
• Breakfast and lunch included
• Limited to 10 people

Any cancellation made before 7 days of the scheduled training class will not be charged a class fee. Cancellations made within 7 days of the scheduled class will not be eligible for a refund and will be charged the full fee of the class.

Kubota WG Spark Ignited Engines Level 300

Course Description:
The WG Spark Ignited Engine course focuses on Kubota’s SI engine models. Emphasis will be placed on multi‐fuel system components and their operation, including liquid propane and gasoline fuel systems. Electrical diagnosis is a major focus of this course, in addition to KGST function and utilization. Students will be challenged with an abundant amount of real‐ world hands‐on activities.

Activities include:

1. Discuss WG spark ignited engine components
   and operation
2. Diagnosing and replacing faulty engine
   components
3. Electrical component testing
4. Fuel system components and operation
5. O2 sensor operation
6. Catalyst operation
7. Breakout box activities
8. Kubota special service tool usage
9. How to use Active Test and Utilities with the diagnostic interface
10. Data monitoring and data graphing with the diagnostic interface
11. DTC inspection procedures

It is required that all attendees complete the online prerequisite courses before attending this class. Each course will take approximately 20 min to complete.

• 22010 ‐ WG Engine Overview
• 22020 ‐ WG Mechanism
• 22110 ‐ WG Sensors
• 22120 ‐ WG Actuators
• 22130 ‐ WG Components: Mechanical Parts
• 22210 ‐ WG Parts Inspection: Common Parts
• 22211 ‐ WG Parts Inspection: Actuators
• 22220 ‐ WG Maintenance
• 22310 ‐ WG System Control
• 22410 ‐ WG Cause & Effect: System Action
• 22510 ‐ WG Engine Diagnostic Tool Overview
• 22520 ‐ EDIS Introduction
• 22530 ‐ KGST

Special Instructions:

• Students are required to bring their laptops for Pre and Post test, E-Com and KEP access loaded for functionality checks.
• Breakfast and lunch included
• Limited to 10 people

Any cancellation made before 7 days of the scheduled training class will not be charged a class fee. Cancellations made within 7 days of the scheduled class will not be eligible for a refund and will be charged the full fee of the class.

Kubota Mechanical Diesel Engines Level 300

Course Description:

This instructor‐led course is 100% hands‐on. Covering all the related engine components of our Kubota mechanically injected diesel engines. Emphasis will be placed on diagnosis, disassembly, inspection, and
reassembly. Students are challenged with numerous real‐world activities and procedures. They start with a running engine and are expected to have a running engine after reassembly to pass the course.

Activities include:

1. Proper disassembly of an engine
2. Engine reassembly procedures
3. Compression testing
4. Cylinder leak down testing
5. Engine diagnosis procedures
6. Injector nozzles testing
7. Kubota special service tool usage
8. Electric governor overview
9. Timing fuel system
10. Engine measurement
11. Part inspection
12. Service manual usage

It is required that all attendees complete the online prerequisite courses before attending this class.  Each course will take approximately 20 min to complete.

• 23010 ‐ Mechanical Fuel System Mechanism
• 23021 ‐ Mechanical Fuel System Components: Other Parts
• 23022 ‐ Mechanical Fuel System Components: Injection Pump
• 23023 ‐ Mechanical Fuel System Components: Injection Nozzle
• 23031 ‐ Mechanical Fuel System Regular Maintenance
• 23032 ‐ Mechanical Fuel System Parts Inspection
• 23040 ‐ Mechanical Governor Overview
• 23050 – Mechanical Fuel System Cause & Effect
• 23061 ‐ Electrical Governor Overview
• 23062 ‐ Electrical Governor Components &
• 23063 ‐ Electrical Governor Error Indication
• 23070 ‐ Boost

Special Instructions:

• Students are required to bring their laptops to class.
• Breakfast and lunch included
• Limited to 10 people

Any cancellation made before 7 days of the scheduled training class will not be charged a class fee. Cancellations made within 7 days of the scheduled class will not be eligible for a refund and will be charged the full fee of the class.

Kubota WG Spark Ignited Engines Level 300

Course Description:
The WG Spark Ignited Engine course focuses on Kubota’s SI engine models. Emphasis will be placed on multi‐fuel system components and their operation, including liquid propane and gasoline fuel systems. Electrical diagnosis is a major focus of this course, in addition to KGST function and utilization. Students will be challenged with an abundant amount of real‐ world hands‐on activities.

Activities include:

1. Discuss WG spark ignited engine components
   and operation
2. Diagnosing and replacing faulty engine
   components
3. Electrical component testing
4. Fuel system components and operation
5. O2 sensor operation
6. Catalyst operation
7. Breakout box activities
8. Kubota special service tool usage
9. How to use Active Test and Utilities with the diagnostic interface
10. Data monitoring and data graphing with the diagnostic interface
11. DTC inspection procedures

It is required that all attendees complete the online prerequisite courses before attending this class. Each course will take approximately 20 min to complete.

• 22010 ‐ WG Engine Overview
• 22020 ‐ WG Mechanism
• 22110 ‐ WG Sensors
• 22120 ‐ WG Actuators
• 22130 ‐ WG Components: Mechanical Parts
• 22210 ‐ WG Parts Inspection: Common Parts
• 22211 ‐ WG Parts Inspection: Actuators
• 22220 ‐ WG Maintenance
• 22310 ‐ WG System Control
• 22410 ‐ WG Cause & Effect: System Action
• 22510 ‐ WG Engine Diagnostic Tool Overview
• 22520 ‐ EDIS Introduction
• 22530 ‐ KGST

Special Instructions:

• Students are required to bring their laptops for Pre and Post test, E-Com and KEP access loaded for functionality checks.
• Breakfast and lunch included
• Limited to 10 people

Any cancellation made before 7 days of the scheduled training class will not be charged a class fee. Cancellations made within 7 days of the scheduled class will not be eligible for a refund and will be charged the full fee of the class.

Kubota Mechanical Diesel Engines Level 300

Course Description:

This instructor‐led course is 100% hands‐on. Covering all the related engine components of our Kubota mechanically injected diesel engines. Emphasis will be placed on diagnosis, disassembly, inspection, and
reassembly. Students are challenged with numerous real‐world activities and procedures. They start with a running engine and are expected to have a running engine after reassembly to pass the course.

Activities include:

1. Proper disassembly of an engine
2. Engine reassembly procedures
3. Compression testing
4. Cylinder leak down testing
5. Engine diagnosis procedures
6. Injector nozzles testing
7. Kubota special service tool usage
8. Electric governor overview
9. Timing fuel system
10. Engine measurement
11. Part inspection
12. Service manual usage

It is required that all attendees complete the online prerequisite courses before attending this class.  Each course will take approximately 20 min to complete.

• 23010 ‐ Mechanical Fuel System Mechanism
• 23021 ‐ Mechanical Fuel System Components: Other Parts
• 23022 ‐ Mechanical Fuel System Components: Injection Pump
• 23023 ‐ Mechanical Fuel System Components: Injection Nozzle
• 23031 ‐ Mechanical Fuel System Regular Maintenance
• 23032 ‐ Mechanical Fuel System Parts Inspection
• 23040 ‐ Mechanical Governor Overview
• 23050 – Mechanical Fuel System Cause & Effect
• 23061 ‐ Electrical Governor Overview
• 23062 ‐ Electrical Governor Components &
• 23063 ‐ Electrical Governor Error Indication
• 23070 ‐ Boost

Special Instructions:

• Students are required to bring their laptops to class.
• Breakfast and lunch included
• Limited to 10 people

Any cancellation made before 7 days of the scheduled training class will not be charged a class fee. Cancellations made within 7 days of the scheduled class will not be eligible for a refund and will be charged the full fee of the class.

Kubota WG Spark Ignited Engines Level 300

Course Description:
The WG Spark Ignited Engine course focuses on Kubota’s SI engine models. Emphasis will be placed on multi‐fuel system components and their operation, including liquid propane and gasoline fuel systems. Electrical diagnosis is a major focus of this course, in addition to KGST function and utilization. Students will be challenged with an abundant amount of real‐ world hands‐on activities.

Activities include:

1. Discuss WG spark ignited engine components
   and operation
2. Diagnosing and replacing faulty engine
   components
3. Electrical component testing
4. Fuel system components and operation
5. O2 sensor operation
6. Catalyst operation
7. Breakout box activities
8. Kubota special service tool usage
9. How to use Active Test and Utilities with the diagnostic interface
10. Data monitoring and data graphing with the diagnostic interface
11. DTC inspection procedures

It is required that all attendees complete the online prerequisite courses before attending this class. Each course will take approximately 20 min to complete.

• 22010 ‐ WG Engine Overview
• 22020 ‐ WG Mechanism
• 22110 ‐ WG Sensors
• 22120 ‐ WG Actuators
• 22130 ‐ WG Components: Mechanical Parts
• 22210 ‐ WG Parts Inspection: Common Parts
• 22211 ‐ WG Parts Inspection: Actuators
• 22220 ‐ WG Maintenance
• 22310 ‐ WG System Control
• 22410 ‐ WG Cause & Effect: System Action
• 22510 ‐ WG Engine Diagnostic Tool Overview
• 22520 ‐ EDIS Introduction
• 22530 ‐ KGST

Special Instructions:

• Students are required to bring their laptops for Pre and Post test, E-Com and KEP access loaded for functionality checks.
• Breakfast and lunch included
• Limited to 10 people

Any cancellation made before 7 days of the scheduled training class will not be charged a class fee. Cancellations made within 7 days of the scheduled class will not be eligible for a refund and will be charged the full fee of the class.

Kubota Mechanical Diesel Engines Level 300

Course Description:

This instructor‐led course is 100% hands‐on. Covering all the related engine components of our Kubota mechanically injected diesel engines. Emphasis will be placed on diagnosis, disassembly, inspection, and
reassembly. Students are challenged with numerous real‐world activities and procedures. They start with a running engine and are expected to have a running engine after reassembly to pass the course.

Activities include:

1. Proper disassembly of an engine
2. Engine reassembly procedures
3. Compression testing
4. Cylinder leak down testing
5. Engine diagnosis procedures
6. Injector nozzles testing
7. Kubota special service tool usage
8. Electric governor overview
9. Timing fuel system
10. Engine measurement
11. Part inspection
12. Service manual usage

It is required that all attendees complete the online prerequisite courses before attending this class.  Each course will take approximately 20 min to complete.

• 23010 ‐ Mechanical Fuel System Mechanism
• 23021 ‐ Mechanical Fuel System Components: Other Parts
• 23022 ‐ Mechanical Fuel System Components: Injection Pump
• 23023 ‐ Mechanical Fuel System Components: Injection Nozzle
• 23031 ‐ Mechanical Fuel System Regular Maintenance
• 23032 ‐ Mechanical Fuel System Parts Inspection
• 23040 ‐ Mechanical Governor Overview
• 23050 – Mechanical Fuel System Cause & Effect
• 23061 ‐ Electrical Governor Overview
• 23062 ‐ Electrical Governor Components &
• 23063 ‐ Electrical Governor Error Indication
• 23070 ‐ Boost

Special Instructions:

• Students are required to bring their laptops to class.
• Breakfast and lunch included
• Limited to 10 people

Any cancellation made before 7 days of the scheduled training class will not be charged a class fee. Cancellations made within 7 days of the scheduled class will not be eligible for a refund and will be charged the full fee of the class.

Kubota WG Spark Ignited Engines Level 300

Course Description:
The WG Spark Ignited Engine course focuses on Kubota’s SI engine models. Emphasis will be placed on multi‐fuel system components and their operation, including liquid propane and gasoline fuel systems. Electrical diagnosis is a major focus of this course, in addition to KGST function and utilization. Students will be challenged with an abundant amount of real‐ world hands‐on activities.

Activities include:

1. Discuss WG spark ignited engine components
   and operation
2. Diagnosing and replacing faulty engine
   components
3. Electrical component testing
4. Fuel system components and operation
5. O2 sensor operation
6. Catalyst operation
7. Breakout box activities
8. Kubota special service tool usage
9. How to use Active Test and Utilities with the diagnostic interface
10. Data monitoring and data graphing with the diagnostic interface
11. DTC inspection procedures

It is required that all attendees complete the online prerequisite courses before attending this class. Each course will take approximately 20 min to complete.

• 22010 ‐ WG Engine Overview
• 22020 ‐ WG Mechanism
• 22110 ‐ WG Sensors
• 22120 ‐ WG Actuators
• 22130 ‐ WG Components: Mechanical Parts
• 22210 ‐ WG Parts Inspection: Common Parts
• 22211 ‐ WG Parts Inspection: Actuators
• 22220 ‐ WG Maintenance
• 22310 ‐ WG System Control
• 22410 ‐ WG Cause & Effect: System Action
• 22510 ‐ WG Engine Diagnostic Tool Overview
• 22520 ‐ EDIS Introduction
• 22530 ‐ KGST

Special Instructions:

• Students are required to bring their laptops for Pre and Post test, E-Com and KEP access loaded for functionality checks.
• Breakfast and lunch included
• Limited to 10 people

Any cancellation made before 7 days of the scheduled training class will not be charged a class fee. Cancellations made within 7 days of the scheduled class will not be eligible for a refund and will be charged the full fee of the class.